Configuration Example - ATM on Pod #2
Post new topic   Reply to topic
AcceliNetworks Forum Index -> Configuring  
View previous topic :: View next topic  
Author Message
Henry3825



Joined: 08 Aug 2004
Posts: 2
Location: America/New_York

PostPosted: Mon Aug 09, 2004 6:43 am    Post subject: Configuration Example - ATM on Pod #2 Reply with quote

Hi, all

I got it to wok! Key thing is the atm esi-address 666666666666.00. Please see the following.

R6#sh run int a0/0/0
Building configuration...

Current configuration : 97 bytes
!
interface ATM0/0/0
no ip address
atm ilmi-keepalive
pvc 0/5 qsaal
!
pvc 0/16 ilmi
!
end

R6#sh run int a0/0/0.1
Building configuration...

Current configuration : 228 bytes
!
interface ATM0/0/0.1 multipoint
ip address 54.1.1.6 255.255.255.0
atm esi-address 666666666666.00
!
svc r6r9 nsap 47.00000000000000000000000A.999999999999.00
protocol ip 54.1.1.9 broadcast
protocol ip 54.1.1.6
!
end

R6#sh atm svc
VCD / Peak Avg/Min Burst
Interface Name VPI VCI Type Encaps SC Kbps Kbps Cells Sts
0/0/0.1 r6r9 0 36 SVC SNAP UBR 155000 UP
R6#sh atm tra
Input OAM Queue: 0/1064 (size/max)
5689 Input packets
5489 Output packets
0 Broadcast packets
0 Packets received on non-existent VC
0 Packets attempted to send on non-existent VC
0 OAM cells received
F5 InEndloop: 0, F5 InSegloop: 0, F5 InAIS: 0, F5 InRDI: 0
F4 InEndloop: 0, F4 InSegloop: 0, F4 InAIS: 0, F4 InRDI: 0
0 OAM cells sent
F5 OutEndloop: 0, F5 OutSegloop: 0, F5 OutRDI: 0
F4 OutEndloop: 0, F4 OutSegloop: 0, F4 OutRDI: 0
0 OAM cell drops
R6#sh atm map
Map list r6r9_ATM0/0/0.1 : PERMANENT
ip 54.1.1.9 maps to NSAP 47.00000000000000000000000A.999999999999.00
, broadcast, connection up, VC 18, VPI 0, VCI 36, ATM0/0/0.1
ip 54.1.1.6 maps to NSAP 47.00000000000000000000000A.999999999999.00
, connection up, VC 18, VPI 0, VCI 36, ATM0/0/0.1

R6#sh atm ilmi-s

Interface : ATM0/0/0 Interface Type : Private UNI (User-side)
ILMI VCC : (0, 16) ILMI Keepalive : Enabled/Up (5 Sec 4 Retries)
ILMI State: UpAndNormal
Peer IP Addr: 192.168.150.97 Peer IF Name: ATM12/1/3
Peer MaxVPIbits: 8 Peer MaxVCIbits: 14
Active Prefix(s) :
47.0000.0000.0000.0000.0000.000a
End-System Registered Address(s) :
47.0000.0000.0000.0000.0000.000a.6666.6666.6666.00(Confirmed)

R6#p 54.1.1.9

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 54.1.1.9, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
Back to top
View user's profile Send private message
Display posts from previous:   
AcceliNetworks Forum Index -> Configuring  
Post new topic   Reply to topic All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum